|
polycarbonate machining
Explanation of Relevant Service Information
Airbus has issued Service Bulletin A320-25-1248, dated February
16,
2001, which describes procedures for modifying the shelf (floor
panel)
above the Litton ADIRUs by installing shims on the webs of the
shelf
support structure in the avionics rack. In addition, for certain
airplanes, the service bulletin includes procedures for modifying
the
polycarbonate guard which covers the ADIRUs, and machining the
ladder located in the
avionics compartment to increase the depth of the slot at the
foot of
the ladder, as applicable. Accomplishment of the actions specified
in
the service bulletin is intended to adequately address the identified
unsafe condition. The DGAC classified this service bulletin as
mandatory and issued French airworthiness directive 2002-125(B),
dated
March 6, 2002, to ensure the continued airworthiness of these
airplanes
in France.
 Please Contact Us to discuss your polycarbonate machining
needs. You design it, we build it.
polycarbonate
machining
|
|
