pvc cone

 

Microprocessor-based technologies and a new physical design enable the system to perform a wide variety of functions in service of a larger audience of users. Besides the ability to perform customized data gathering and processing of a large suite of sensors, the system can rapidly disseminate that information via a multitude of pathways.
Foremost is the critical need to accurately and reliably capture water level measurements. Thus, the new system continues the tradition of having primary and backup water level sensors. The primary water level measurement is obtained from a downward looking acoustic sensor. It sends a shock wave of acoustic energy down a half-inch diameter PVC sounding tube and measures the travel time of the reflected signal from a calibration reference point and from the water surface. The calibration reference allows the controller to adjust the measurements for variations in sound velocity due to changes in temperature and humidity. The sensor controller performs the necessary calculations to determine the distance to the water surface. The sounding tube is mounted inside a 6-inch diameter PVC protective well which has a symmetrical 2-inch diameter double cone orifice. The protective well is more open to the local dynamics than the traditional stilling well and thus does not mechanically filter much of the wind waves and chop. In areas of high velocity tidal currents and high energy sea swell and waves, parallel plates are mounted below the orifice to reduce the pull down effects. A schematic diagram of the new system is presented below.
In addition to water levels, the new system has the capability of handling up to 11 different ancillary oceanographic and meteorological sensors. These include such environmental parameters as, wind speed, direction and gust, water current speed and direction, air and water temperature, barometric pressure, water conductivity, dew point, rain fall and solar radiation.

 

PVC ConePlease Contact Us to discuss your pvc cone needs. You design it, we build it.

pvc cone

home | contact | techniques | fittings | sitemap | privacy

 

 

 

 

Plastic fabrication solutions are only a call away!

cnc router, cnc router, plastic manufacturing, plastic fabrication, graduated cylinder, polypropylene, fume hood, PVC duct. From web designers in Massachusetts