plastic flange

 

Micrometer measurement system

Metal cans . Required: cover hook, body hook, width (length, height), tightness (observation for wrinkle), and thickness. Optional: overlap (by calculation) and countersink.

Plastic cans with double-seamed metal ends . Required in addition to seam scope examination: thickness and tightness. Compare seam thickness to that calculated from individual thicknesses of plastic flange and neck and metal end, excluding compound. Optional: cover hook, countersink, and width (length, height).

Seam scope of projector

Metal cans. Required: body hook, overlap, tightness (observation for wrinkle), and thickness by micrometer. Optional: width (length, height), cover hook, and countersink.

Plastic cans with double-seamed metal ends . Required: overlap, body hook, countersink, width (length, height). Optional: cover hook.

Visual examination for plastic cans with double-seamed metal ends . Required: tightness. Note compression of pressure ridge or flange during overlap measurement. Remove entire cover and examine pressure ridge for continuity. Under 21 CFR 113.60 (a,1,i,c) add the following: pressure ridge for plastic cans with double-seamed ends; impression around complete inside periphery of can body in double seam area.

 

Plastic FlangePlease Contact Us to discuss your plastic flange needs. You design it, we build it.

plastic flange

home | contact | techniques | fittings | sitemap | privacy

 

 

 

 

Plastic fabrication solutions are only a call away!
cnc router, cnc router, plastic manufacturing, plastic fabrication, graduated cylinder, polypropylene, fume hood, PVC duct. From web designers in Massachusetts