CPVC Wye

Solvent Cement Plastic Pipe Joints. Plastic pipe and fittings designed to be joined by solvent cementing shall comply with appropriate IAPMO Installation Standards.
ABS pipe and fittings shall be cleaned and then joined with listed solvent cement(s).
CPVC pipe and fittings shall be cleaned and joined with listed primer(s) and solvent cement(s).
The return vent shall be connected to the horizontal drain through a wye-branch fitting and shall, in addition, be provided with a foot vent taken off the vertical fixture vent by means of a wye-branch immediately below the floor and extending to the nearest partition and then through the roof to the open air or may be connected to other vents at a point not less than 6" (152.4 mm) above the flood level rim of the fixtures served. Drainage fittings shall be used on all parts of the vent below the floor level and a minimum slope of 1/4" per foot (21 mm/m) back to the drain shall be maintained. The return bend used under the drainboard shall be a one piece fitting or an assembly of a 45°, a 90°, and a 45° elbow in the order named. Pipe sizing shall be as elsewhere required in this Code.

Credit: CPVC Wye

Please Contact Us to discuss your CPVC Wye needs. You design it, we build it.